Construction Plan Includes Measures for Corrugated Guardrail Safety
1. When laying out columns, the layout of underground pipelines and structures should be fully collected and clearly marked. During construction, the position of columns should be adjusted or the fixing method of columns should be changed to avoid damaging cables, pipelines, and structures.
2. The key points to pay attention to in the construction of waveform guardrails are the end of the roadside guardrail, the end of the median strip, the transition of the bridge concrete guardrail, the emergency telephone opening, and the triangular end of the ramp. The key to its control lies in improving the accuracy of measurement and layout, repeatedly calculating and measuring according to the coordinates specified in the design and the actual gradient section, confirming its gradient line shape and coordinating with the road line shape before installing the column.
3. The key to the quality of guardrail materials is the waveform beam, especially the appearance quality of the galvanized layer, which is the face of the face engineering. Therefore, the first step is to carefully select the production unit of the waveform beam, and it is required that it must have a batch production qualification certificate issued by the Traffic Engineering Testing Center of the Ministry of Transportation; Secondly, in the hot-dip galvanizing process, new processes and technologies are adopted: ① Design the galvanizing time according to different materials to solve the inherent quality defects of insufficient galvanized layer thickness. ② Adopting a new blowing and wiping process to ensure that the galvanized layer of the guardrail components is uniform, the appearance is smooth, and there are no dripping marks, making its surface glossy and long-lasting; Once again, strict quality inspection should be carried out to ensure that the galvanized layer of the waveform beam meets the standards, with uniform thickness and consistent color. Unqualified products are strictly prohibited from entering the construction site.
4. The key and difficult point of guardrail construction is the installation of columns. During construction, the position, spacing, elevation, and verticality of columns should be strictly controlled, and attention should be paid to the alignment and alignment, and the position, spacing, elevation, and verticality of columns should be strictly prevented from exceeding the allowable deviation.
To address the above situation, the following actions can be taken:
① Select advanced hydraulic pile drivers.
② Adopting advanced and reliable construction techniques:
a. Accurate positioning of column piling to avoid accumulated errors;
b. The pile driving unit should be separated as much as possible between different structures for construction. When the section is long and needs to be replaced, ensure the accurate positioning of the last column;
c. Improve the casing design of the pile driver by replacing the outer pile head with an inner pile head, and placing a rubber pad inside the pile driver head to protect the outer side and top of the column from damage during construction;
d. Strengthen the adjustment of column spacing, verticality, and linearity, adjust while construction, and improve the one-time molding rate.
Click here to contact us for free sample and quotes
Tell/Whatsapp /Wechat/: +86-18076580269
Welcome to contact us. We are a professional team with 14 years of experience